Lead glass showcase

I made a glass in lead showcase for the model. It gives a nice open view to the model. On the baseplate are two switches for the lights on the model and on the back there is a connector for a 4.5mm jack plug.



Untitled by Model Fishingships, on Flickr



Untitled by Model Fishingships, on Flickr

End pictures Dutch beamtrawler

  Thank you for watching.

1 by Model Fishingships, on Flickr
 
2 by Model Fishingships, on Flickr
 
3 by Model Fishingships, on Flickr
 

Rigging is done

Busy doing the rigging. A horrible task to find out how all the lines and blocks has to go and actually making them to do so. It looks like one big spagethis to me sometimes.
Untitled by Model Fishingships, on Flickr
 
After some hours all the rigging is ready
Untitled by Model Fishingships, on Flickr
 
And I tested the leds (again) and thankfully they all work
Untitled by Model Fishingships, on Flickr
 
Untitled by Model Fishingships, on Flickr
 
Untitled by Model Fishingships, on Flickr
 
Untitled by Model Fishingships, on Flickr
 
Untitled by Model Fishingships, on Flickr
 
Untitled by Model Fishingships, on Flickr
 
And a temporally fit on the baseplate. The baseplate has a contact for the powersupply and a switch for the lights
Untitled by Model Fishingships, on Flickr
 
Next time I hope to show you the final pictures of this triplet.
 
See you then (and after that for a new fishingship offcourse)

Rigging (start)

Lots of work done on the Pelikaan. Frontmast, deckhatches, blocks and pulleys painted. Wooden deck, and a lot of other smaller jobs done.
Untitled by Model Fishingships, on Flickr

Untitled by Model Fishingships, on Flickr
Untitled by Model Fishingships, on Flickr
Untitled by Model Fishingships, on Flickr


Bussy in the harbouw
Untitled by Model Fishingships, on Flickr


And a beginning on the rigging. A very big job to do but also to find out how it has to be done
Untitled by Model Fishingships, on Flickr

Painting the hull

Added some paint to the hulls, including striping and the registrationnumbers
 
Untitled by Model Fishingships, on Flickr
 
Untitled by Model Fishingships, on Flickr
 
Untitled by Model Fishingships, on Flickr

Red accents

Added some red accents. The ship's name on the side and the letters vD (van Duijn) stands for the owners name. Also painted the puls winches. For the (orange) pulse wire. This wire leads to the net on which are electrodes attached. These electrodes send pulses to the seabottome so the fish jumps up in the net. Much less damage to the bottom and less fuel consumption.


Untitled by Model Fishingships, on Flickr

Untitled by Model Fishingships, on Flickr

painting again

Paintshop and assambly-line are running

Untitled by Model Fishingships, on Flickr

Untitled by Model Fishingships, on Flickr

Untitled by Model Fishingships, on Flickr

Untitled by Model Fishingships, on Flickr

Untitled by Model Fishingships, on Flickr

Untitled by Model Fishingships, on Flickr